Pipe Shield also allows for purchase of the epoxy used for pipe-lining procedures. The Pipe Shield AN500 is certified to ANSI/NSF 61 that makes it completely safe for use in potable water applications.
Please call 905.670.7481 for more information on resin sales.
PIPE SHIELD EPOXY
The Pipe Shield epoxy is the product of a highly advanced resin technology and is certified to ANSI/NSF Standard 61 – Drinking Water System Components. Application of the epoxy by compressed air methods and the consequent curing results in the creation of an impermeable layer on the pipe’s inside diameter. This prevents any further corrosion, which in turn means no pinhole leaks, unusual water pressure, and a continuously high quality of drinking water.
The Pipe Shield coating has a smooth, hard gloss finish with excellent water resistance and hydraulic profile. It is a two-part chemical, first is the actual resin and second is the hardener. The mix ratio is perfected in such a way that the epoxy provides the same outstanding results despite varying operating conditions and ambient settings.
BENEFITS
Pipe Shield lining systems will restore old water pipes to compete against replacing the pipes, a process which is much more costly, time consuming and energy inefficient. The following are some of the benefits of this epoxy coating:
Completely non-toxic – Tested and thereby approved to be completely non-toxic and suitable for potable water
Ontario Building Code Approved – Our process is approved by the Ontario
Longevity – New pipes start to deteriorate the moment water is turned on the very first time. Epoxy lining protects against further corrosion and pinhole leaks for a minimum of 50 years. Furthermore, epoxy coatings are almost 3-times harder then copper pipes.
Water Quality – No further corrosion from the leaching of lead, galvanized or copper pipes resulting in improved drinking water quality.
Maintenance – Due to the permanent barrier created, there are no pinhole with copper pipes, or the rapid growth of tuberculation in iron pipes.
Hydraulic Capacity – Improved water flow in your system thus reducing electrical requirements for plumbing systems.
Drinking Water System Components
NSF/ANSI STANDARD 61
The Standard was established in 1988 to establish minimum requirements for the control of potential adverse human health effects from products that contact drinking water.
NSF International is a not-for-profit, non-governmental organization, is the world leader in standards development, product certification, education, and risk-management for public health and safety. For 60 years, NSF has been committed to public health, safety, and protection of the environment.
The certification process involves testing for each water contact material to determine any possible ingredients, contaminants or reaction by-products that may potentially leach into drinking water. Most products then undergo a 3-week process being exposed to various formulated waters designed to extract specific contaminant types. These contaminant concentrations are then evaluated by toxicologists to ensure their percentages are within certification limits. Additionally, plant audits and other tests are also performed for further quality assurances.
